Optimal Thickness Design of Thermal Protective Clothing

Zhuojun Yao; Yuefeng Li; Zhihong Liu

doi:doi:10.11648/j.sd.20190703.14

| Peer-Reviewed

Optimal Thickness Design of Thermal Protective Clothing

Zhuojun Yao, Yuefeng Li, Zhihong Liu

Published in Science Discovery (Volume 7, Issue 3)

Received: 8 April 2019 Published: 15 June 2019

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

Under the premise of ensuring the protective effect, it is of great significance to design the optimal protective suit. In this paper, under the premise of analyzing the basic temperature distribution, the optimal thickness of the protective clothing is optimized. First, a temperature distribution model based on the heat transfer equation. The partial differential equations of temperature, time and spatial position are written for fabric layers I, II, III and air layer IV respectively. The initial and boundary conditions are given according to the measured external temperature and thermodynamic laws of skin. The finite difference method is used to numerically solve the partial differential equations to obtain the temperature distribution at different time and space. It was found that the human skin temperature increased with time and reached a steady state at time t=1645s. Then the optimal thickness is solved. Under the condition of meeting the basic safety requirements, the constraint optimization model with the optimal II layer thickness (ie the thinnest and the lowest cost) as the objective function is established. Then use the particle swarm optimization algorithm based on dynamic target method to solve. The optimum layer thickness was found to be 6.2 mm. Finally, the model was tested. Using the finite element heat transfer analysis of ANSYS workbanch to simulate the temperature distribution in the actual material, the similarity is high, which proves that the temperature distribution model is more accurate. This model can be extended to other heat transfer related clothing and container optimal thickness design.

Published in	Science Discovery (Volume 7, Issue 3)
DOI	10.11648/j.sd.20190703.14
Page(s)	152-160
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2019. Published by Science Publishing Group

Keywords

Thermal Protective Clothing, Heat Transfer Model, Finite Difference Method, Particle Swarm Optimization, ANSYS Finite Element Analysis

References

[1]	卢琳珍.多层热防护服装的热传递模型及参数最优决定[D].浙江理工大学,2018。
[2]	卢琳珍,徐定华,徐映红.应用三层热防护服热传递改进模型的皮肤烧伤度预测[J].纺织学报,2018,39(01):111-118+125。
[3]	朱方龙．服装的热防护功能[M]．北京:中国纺织出版社，2015: 98-131． ZHU FangLong． Clothing Thermal ProtectionFunction [M]． Beijing: China Textile ＆ Apparel Press, 2015: 98-131．
[4]	CHITRPHIROMSRI P,KUZNETSOV A V． Modeling heat and moisture transport in firefighter protective clothing during flash fire exposure [J]. Heat and MassTransfer, 2005, 41(3): 206-215.
[5]	MELL W E，LAWSON J R． Heat transfer model for firefighter's protective clothing [J]． Fire Technol, 1999, 36: 39-68.
[6]	AHMED GHAZY， DONALD J BERGSTROM． Numerical simulation of heat transfer in firefighters' protective clothing with multiple air gaps during flash fireexposure [J]． Numerical Heat Transfer Applications，2012，61(8): 569-593．
[7]	李萍,张磊,王垚廷.基于Matlab的偏微分方程数值计算[J].齐鲁工业大学学报(自然科学版),2017,31(04):39-43.
[8]	潘斌. 热防护服装热传递数学建模及参数决定反问题[D].浙江理工大学,2017.
[9]	徐定华．纺织材料热湿传递数学模型及设计反问题．北京：科学出版社2014.
[10]	朱方龙,王秀娟,张启泽,张渭源.火灾环境下应急救援防护服传热数值模拟[J].纺织学报,2009,30(04):106-110.
[11]	张建峰,王翠玲,吴玉萍,顾明.ANSYS有限元分析软件在热分析中的应用[J].冶金能源,2004(05):9-12.
[12]	林冬华,武文斌,朱珊珊,李聪.磨辊轴承热力学有限元分析[J].现代面粉工业,2017,31(01):11-13.
[13]	潘从芳,娄毅,蔺红,张起瑞,杨一,胡贺明.基于ANSYS的温度场仿真分析[J].工业控制计算机,2015,28(08):104-105.
[14]	徐迅.多目标粒子群优化算法及其应用研究[D].江南大学,2014.
[15]	刘彬,张仁津.基于动态多粒子群的多目标优化算法[J].计算机应用,2013,33(12):3375-3379.
[16]	欧伟.结构多目标模糊优化设计[D].重庆大学,2006.

Cite This Article

Plain Text BibTeX RIS

APA Style

Zhuojun Yao, Yuefeng Li, Zhihong Liu. (2019). Optimal Thickness Design of Thermal Protective Clothing. Science Discovery, 7(3), 152-160. https://doi.org/10.11648/j.sd.20190703.14

Copy | Download

ACS Style

Zhuojun Yao; Yuefeng Li; Zhihong Liu. Optimal Thickness Design of Thermal Protective Clothing. Sci. Discov. 2019, 7(3), 152-160. doi: 10.11648/j.sd.20190703.14

Copy | Download

AMA Style

Zhuojun Yao, Yuefeng Li, Zhihong Liu. Optimal Thickness Design of Thermal Protective Clothing. Sci Discov. 2019;7(3):152-160. doi: 10.11648/j.sd.20190703.14

Copy | Download

@article{10.11648/j.sd.20190703.14,
  author = {Zhuojun Yao and Yuefeng Li and Zhihong Liu},
  title = {Optimal Thickness Design of Thermal Protective Clothing},
  journal = {Science Discovery},
  volume = {7},
  number = {3},
  pages = {152-160},
  doi = {10.11648/j.sd.20190703.14},
  url = {https://doi.org/10.11648/j.sd.20190703.14},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.sd.20190703.14},
  abstract = {Under the premise of ensuring the protective effect, it is of great significance to design the optimal protective suit. In this paper, under the premise of analyzing the basic temperature distribution, the optimal thickness of the protective clothing is optimized. First, a temperature distribution model based on the heat transfer equation. The partial differential equations of temperature, time and spatial position are written for fabric layers I, II, III and air layer IV respectively. The initial and boundary conditions are given according to the measured external temperature and thermodynamic laws of skin. The finite difference method is used to numerically solve the partial differential equations to obtain the temperature distribution at different time and space. It was found that the human skin temperature increased with time and reached a steady state at time t=1645s. Then the optimal thickness is solved. Under the condition of meeting the basic safety requirements, the constraint optimization model with the optimal II layer thickness (ie the thinnest and the lowest cost) as the objective function is established. Then use the particle swarm optimization algorithm based on dynamic target method to solve. The optimum layer thickness was found to be 6.2 mm. Finally, the model was tested. Using the finite element heat transfer analysis of ANSYS workbanch to simulate the temperature distribution in the actual material, the similarity is high, which proves that the temperature distribution model is more accurate. This model can be extended to other heat transfer related clothing and container optimal thickness design.},
 year = {2019}
}

Copy | Download

TY - JOUR
T1 - Optimal Thickness Design of Thermal Protective Clothing
AU - Zhuojun Yao
AU - Yuefeng Li
AU - Zhihong Liu
Y1 - 2019/06/15
PY - 2019
N1 - https://doi.org/10.11648/j.sd.20190703.14
DO - 10.11648/j.sd.20190703.14
T2 - Science Discovery
JF - Science Discovery
JO - Science Discovery
SP - 152
EP - 160
PB - Science Publishing Group
SN - 2331-0650
UR - https://doi.org/10.11648/j.sd.20190703.14
AB - Under the premise of ensuring the protective effect, it is of great significance to design the optimal protective suit. In this paper, under the premise of analyzing the basic temperature distribution, the optimal thickness of the protective clothing is optimized. First, a temperature distribution model based on the heat transfer equation. The partial differential equations of temperature, time and spatial position are written for fabric layers I, II, III and air layer IV respectively. The initial and boundary conditions are given according to the measured external temperature and thermodynamic laws of skin. The finite difference method is used to numerically solve the partial differential equations to obtain the temperature distribution at different time and space. It was found that the human skin temperature increased with time and reached a steady state at time t=1645s. Then the optimal thickness is solved. Under the condition of meeting the basic safety requirements, the constraint optimization model with the optimal II layer thickness (ie the thinnest and the lowest cost) as the objective function is established. Then use the particle swarm optimization algorithm based on dynamic target method to solve. The optimum layer thickness was found to be 6.2 mm. Finally, the model was tested. Using the finite element heat transfer analysis of ANSYS workbanch to simulate the temperature distribution in the actual material, the similarity is high, which proves that the temperature distribution model is more accurate. This model can be extended to other heat transfer related clothing and container optimal thickness design.
VL - 7
IS - 3
ER -

Copy | Download

Author Information

Zhuojun Yao

Department of Economics & Management, Rongcheng College of Harbin University of Science and Technology, Weihai, China
Yuefeng Li

Department of Mechanical Engineering, Rongcheng College of Harbin University of Science and Technology, Weihai, China
Zhihong Liu

Department of Software Engineering, Rongcheng College of Harbin University of Science and Technology, Weihai, China

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Zhuojun Yao, Yuefeng Li, Zhihong Liu. (2019). Optimal Thickness Design of Thermal Protective Clothing. Science Discovery, 7(3), 152-160. https://doi.org/10.11648/j.sd.20190703.14

Copy | Download

ACS Style

Zhuojun Yao; Yuefeng Li; Zhihong Liu. Optimal Thickness Design of Thermal Protective Clothing. Sci. Discov. 2019, 7(3), 152-160. doi: 10.11648/j.sd.20190703.14

Copy | Download

AMA Style

Zhuojun Yao, Yuefeng Li, Zhihong Liu. Optimal Thickness Design of Thermal Protective Clothing. Sci Discov. 2019;7(3):152-160. doi: 10.11648/j.sd.20190703.14

Copy | Download

@article{10.11648/j.sd.20190703.14,
  author = {Zhuojun Yao and Yuefeng Li and Zhihong Liu},
  title = {Optimal Thickness Design of Thermal Protective Clothing},
  journal = {Science Discovery},
  volume = {7},
  number = {3},
  pages = {152-160},
  doi = {10.11648/j.sd.20190703.14},
  url = {https://doi.org/10.11648/j.sd.20190703.14},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.sd.20190703.14},
  abstract = {Under the premise of ensuring the protective effect, it is of great significance to design the optimal protective suit. In this paper, under the premise of analyzing the basic temperature distribution, the optimal thickness of the protective clothing is optimized. First, a temperature distribution model based on the heat transfer equation. The partial differential equations of temperature, time and spatial position are written for fabric layers I, II, III and air layer IV respectively. The initial and boundary conditions are given according to the measured external temperature and thermodynamic laws of skin. The finite difference method is used to numerically solve the partial differential equations to obtain the temperature distribution at different time and space. It was found that the human skin temperature increased with time and reached a steady state at time t=1645s. Then the optimal thickness is solved. Under the condition of meeting the basic safety requirements, the constraint optimization model with the optimal II layer thickness (ie the thinnest and the lowest cost) as the objective function is established. Then use the particle swarm optimization algorithm based on dynamic target method to solve. The optimum layer thickness was found to be 6.2 mm. Finally, the model was tested. Using the finite element heat transfer analysis of ANSYS workbanch to simulate the temperature distribution in the actual material, the similarity is high, which proves that the temperature distribution model is more accurate. This model can be extended to other heat transfer related clothing and container optimal thickness design.},
 year = {2019}
}

Copy | Download