Photometry Under the Condition of "Precision Rule"

Yuan Bingjian; Ren Ping

doi:doi:10.11648/j.sd.20200801.11

| Peer-Reviewed

Photometry Under the Condition of "Precision Rule"

Yuan Bingjian, Ren Ping

Published in Science Discovery (Volume 8, Issue 1)

Received: 7 January 2020 Published: 26 February 2020

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

Taking the determination of manganese in iron and steel as an example, it is proved that following the "precision rule", that is, “to maintain infection consistency of each factor for the each sample in the same measurement series”, the "content determination series" of photometry will present its "content absorption law": In the absorbance domain ,the coordinate points of all content and corresponding absorbance must be in the same straight line. Whether it's trace or high content, the connecting line of the coordinate points of the upper and lower limits of the two standard samples can be used as the "measuring line" of the sample content. The "two standard photometry" is established, which changes the traditional concept and presents the simple, high-speed and high efficiency nature of photometry. It is also the embodiment of normal distribution theory in photometry, so the measured values of samples are normal distribution. Systematic error and abnormal error (statistical outlier) are easy to find, which ensures the reliability of the measurement results. The uncertainty evaluation of the measurement results is simplified, the measurement model of the uncertainty is established, which is concise and practical, and realizes the unity with the allowable error; The new understanding also provides new ideas for the development of photometer: The measuring parts of the photometer shall conform to the "precision rule"; The filter beam has higher sensitivity and better reproducibility.

Published in	Science Discovery (Volume 8, Issue 1)
DOI	10.11648/j.sd.20200801.11
Page(s)	1-6
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2020. Published by Science Publishing Group

Keywords

"Precision Rule", Spectrophotometry, Domain, Trace, High Content, Normal Distribution, Allowable Error, Uncertainty

References

[1]	奚长生.磷钼蓝分光光度法测定维生C[J].光谱学与光谱分析，2001，21(5):723-725.
[2]	袁秉鉴.高锰酸分光光度法的研究[J].化学分析计量，2006，15(2):13-17.
[3]	夏世平.分光光度法同时测定微量铁和钴[J].化学分析计量，2010，19(1):43-45.
[4]	袁秉鉴.光度法测定不锈钢中的铬、镍、钼、钛、锰[J].化学分析计量，2010，19(1):55-57.
[5]	尚庆坤，崔运成，赫春香，等.分析化学[M].北京:科学出版社，2014:201-208.
[6]	彭晓文，程玉红.分析化学[M].北京:中国铁道出版社，2014:126-130.
[7]	王彤，段春生.分析化学(第二版)[M].北京:高等教育出版社，2013:237-244.
[8]	王玉枝，张正奇，宦双燕，等.分析化学(第三版)[M].北京:科学出版社，2016:186-19.
[9]	王文渊，曲中堂.分析化学[M].北京:化学工业出版社，2013:110-114.
[10]	高立红，周凯红，王燕霞，等.硅钼蓝分光光度法测定氟化稀土中二氧化硅[J].冶金分析，2017，37(4):57-61.
[11]	邓军华，王一凌，亢德华，等.二安替吡啉甲烷光度法测定含钛物料中二氧化钛[J].冶金分析，2015，35(10):30-35.
[12]	钟国秀，黄清华.光度法快速测定铜合金中微量铝[J].化学分析计量，2011，20(5):60-62.
[13]	王冀艳，刘勉，赵晓亮，等.酸溶-苯基荧光酮光度法测定矿样中钽[J].冶金分析，2017，37(4):48-51.
[14]	袁秉鉴，任屏.两标准光度法测定钢铁中的锰、硅、磷[J].化学分析计量，2017，26(4):71-74.
[15]	JJF1059.1-2012测量不确定度评定与表示[S].
[16]	袁秉鉴.光度法不确定度的数学模型[J].计量技术，2010(1):67-70
[17]	袁秉鉴.重复测量结果的不确定度评定[J].中国计量，2015(1):89-90.
[18]	袁秉鉴.增量光度法测定巴士合金中的杂质铅[J].化学分析计量，2004，13(2):20-56.
[19]	余君武，肖艳清.概率论与数理统计[M].北京:理工大学出版社，2009:95.
[20]	杨振明.概率论(第二版)[M].北京:科学出版社，2008:74.
[21]	刘智敏.误差与数据处理[M].北京:原子能出版社，1981:59-83.
[22]	GB/T4883-2008数据的统计处理和解释，正态样本离群值的判断和处理[S].
[23]	郑德如.统计学[M].上海:立信会计出版社，1994:307-308
[24]	ISO/IEC17025校准和测试实验室能力的通用要求[S].

Cite This Article

Plain Text BibTeX RIS

APA Style

Yuan Bingjian, Ren Ping. (2020). Photometry Under the Condition of "Precision Rule". Science Discovery, 8(1), 1-6. https://doi.org/10.11648/j.sd.20200801.11

Copy | Download

ACS Style

Yuan Bingjian; Ren Ping. Photometry Under the Condition of "Precision Rule". Sci. Discov. 2020, 8(1), 1-6. doi: 10.11648/j.sd.20200801.11

Copy | Download

AMA Style

Yuan Bingjian, Ren Ping. Photometry Under the Condition of "Precision Rule". Sci Discov. 2020;8(1):1-6. doi: 10.11648/j.sd.20200801.11

Copy | Download

@article{10.11648/j.sd.20200801.11,
  author = {Yuan Bingjian and Ren Ping},
  title = {Photometry Under the Condition of "Precision Rule"},
  journal = {Science Discovery},
  volume = {8},
  number = {1},
  pages = {1-6},
  doi = {10.11648/j.sd.20200801.11},
  url = {https://doi.org/10.11648/j.sd.20200801.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.sd.20200801.11},
  abstract = {Taking the determination of manganese in iron and steel as an example, it is proved that following the "precision rule", that is, “to maintain infection consistency of each factor for the each sample in the same measurement series”, the "content determination series" of photometry will present its "content absorption law": In the absorbance domain ,the coordinate points of all content and corresponding absorbance must be in the same straight line. Whether it's trace or high content, the connecting line of the coordinate points of the upper and lower limits of the two standard samples can be used as the "measuring line" of the sample content. The "two standard photometry" is established, which changes the traditional concept and presents the simple, high-speed and high efficiency nature of photometry. It is also the embodiment of normal distribution theory in photometry, so the measured values of samples are normal distribution. Systematic error and abnormal error (statistical outlier) are easy to find, which ensures the reliability of the measurement results. The uncertainty evaluation of the measurement results is simplified, the measurement model of the uncertainty is established, which is concise and practical, and realizes the unity with the allowable error; The new understanding also provides new ideas for the development of photometer: The measuring parts of the photometer shall conform to the "precision rule"; The filter beam has higher sensitivity and better reproducibility.},
 year = {2020}
}

Copy | Download

TY  - JOUR
T1  - Photometry Under the Condition of "Precision Rule"
AU  - Yuan Bingjian
AU  - Ren Ping
Y1  - 2020/02/26
PY  - 2020
N1  - https://doi.org/10.11648/j.sd.20200801.11
DO  - 10.11648/j.sd.20200801.11
T2  - Science Discovery
JF  - Science Discovery
JO  - Science Discovery
SP  - 1
EP  - 6
PB  - Science Publishing Group
SN  - 2331-0650
UR  - https://doi.org/10.11648/j.sd.20200801.11
AB  - Taking the determination of manganese in iron and steel as an example, it is proved that following the "precision rule", that is, “to maintain infection consistency of each factor for the each sample in the same measurement series”, the "content determination series" of photometry will present its "content absorption law": In the absorbance domain ,the coordinate points of all content and corresponding absorbance must be in the same straight line. Whether it's trace or high content, the connecting line of the coordinate points of the upper and lower limits of the two standard samples can be used as the "measuring line" of the sample content. The "two standard photometry" is established, which changes the traditional concept and presents the simple, high-speed and high efficiency nature of photometry. It is also the embodiment of normal distribution theory in photometry, so the measured values of samples are normal distribution. Systematic error and abnormal error (statistical outlier) are easy to find, which ensures the reliability of the measurement results. The uncertainty evaluation of the measurement results is simplified, the measurement model of the uncertainty is established, which is concise and practical, and realizes the unity with the allowable error; The new understanding also provides new ideas for the development of photometer: The measuring parts of the photometer shall conform to the "precision rule"; The filter beam has higher sensitivity and better reproducibility.
VL  - 8
IS  - 1
ER  -

Copy | Download

Author Information

Yuan Bingjian

State Owned Plant NO. 5409, Yuncheng City, China
Ren Ping

State Owned Plant NO. 5409, Yuncheng City, China

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Yuan Bingjian, Ren Ping. (2020). Photometry Under the Condition of "Precision Rule". Science Discovery, 8(1), 1-6. https://doi.org/10.11648/j.sd.20200801.11

Copy | Download

ACS Style

Yuan Bingjian; Ren Ping. Photometry Under the Condition of "Precision Rule". Sci. Discov. 2020, 8(1), 1-6. doi: 10.11648/j.sd.20200801.11

Copy | Download

AMA Style

Yuan Bingjian, Ren Ping. Photometry Under the Condition of "Precision Rule". Sci Discov. 2020;8(1):1-6. doi: 10.11648/j.sd.20200801.11

Copy | Download

@article{10.11648/j.sd.20200801.11,
  author = {Yuan Bingjian and Ren Ping},
  title = {Photometry Under the Condition of "Precision Rule"},
  journal = {Science Discovery},
  volume = {8},
  number = {1},
  pages = {1-6},
  doi = {10.11648/j.sd.20200801.11},
  url = {https://doi.org/10.11648/j.sd.20200801.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.sd.20200801.11},
  abstract = {Taking the determination of manganese in iron and steel as an example, it is proved that following the "precision rule", that is, “to maintain infection consistency of each factor for the each sample in the same measurement series”, the "content determination series" of photometry will present its "content absorption law": In the absorbance domain ,the coordinate points of all content and corresponding absorbance must be in the same straight line. Whether it's trace or high content, the connecting line of the coordinate points of the upper and lower limits of the two standard samples can be used as the "measuring line" of the sample content. The "two standard photometry" is established, which changes the traditional concept and presents the simple, high-speed and high efficiency nature of photometry. It is also the embodiment of normal distribution theory in photometry, so the measured values of samples are normal distribution. Systematic error and abnormal error (statistical outlier) are easy to find, which ensures the reliability of the measurement results. The uncertainty evaluation of the measurement results is simplified, the measurement model of the uncertainty is established, which is concise and practical, and realizes the unity with the allowable error; The new understanding also provides new ideas for the development of photometer: The measuring parts of the photometer shall conform to the "precision rule"; The filter beam has higher sensitivity and better reproducibility.},
 year = {2020}
}

Copy | Download

TY  - JOUR
T1  - Photometry Under the Condition of "Precision Rule"
AU  - Yuan Bingjian
AU  - Ren Ping
Y1  - 2020/02/26
PY  - 2020
N1  - https://doi.org/10.11648/j.sd.20200801.11
DO  - 10.11648/j.sd.20200801.11
T2  - Science Discovery
JF  - Science Discovery
JO  - Science Discovery
SP  - 1
EP  - 6
PB  - Science Publishing Group
SN  - 2331-0650
UR  - https://doi.org/10.11648/j.sd.20200801.11
AB  - Taking the determination of manganese in iron and steel as an example, it is proved that following the "precision rule", that is, “to maintain infection consistency of each factor for the each sample in the same measurement series”, the "content determination series" of photometry will present its "content absorption law": In the absorbance domain ,the coordinate points of all content and corresponding absorbance must be in the same straight line. Whether it's trace or high content, the connecting line of the coordinate points of the upper and lower limits of the two standard samples can be used as the "measuring line" of the sample content. The "two standard photometry" is established, which changes the traditional concept and presents the simple, high-speed and high efficiency nature of photometry. It is also the embodiment of normal distribution theory in photometry, so the measured values of samples are normal distribution. Systematic error and abnormal error (statistical outlier) are easy to find, which ensures the reliability of the measurement results. The uncertainty evaluation of the measurement results is simplified, the measurement model of the uncertainty is established, which is concise and practical, and realizes the unity with the allowable error; The new understanding also provides new ideas for the development of photometer: The measuring parts of the photometer shall conform to the "precision rule"; The filter beam has higher sensitivity and better reproducibility.
VL  - 8
IS  - 1
ER  -

Copy | Download